Winterization/Dewaxing of Cannabis Extracts February 27, 2021 admin Cannabis Oil 21 Learn about the process of winterization/dewaxing and the processes that drive it. goldleaflabs.com
You do know that Wikipedia is not the be all end all regarding information. It is a publicly edited encyclopedia. I mean I could go on there and change anything.
Does the ratio of your crude to ethanol play a big factor?
So with proper de-waxing a company does not need to use propylene glycol or other additives to make vape cartridges?
I have high purity laboratory grade acetone. Is this safe to use on my bho. I also have laboratory grade ISO. Are either one of these okay. Or is it good rule to only use what's safe to ingest. I also have hot plate w/stirrer buchner funnels vaccum pump and chamber plus quantitative filter papers
Can I speed up the time it takes for the fats to crash out at low temps by reducing the percentage of solvent? In other words, put the solution in a distiller and reclaim 50% of the solvent before the freezing step?
Thank you, excellent information, good luck in everything)
Hi Ryan, Why did you state that you wouldn't go below (-50C)? I assume that the solubility of the cannabinoids goes down too much……Yes (i.e. as the temp goes down molecular activity goes down as well)? Then what would you suggest would be the ideal temp for hemp extraction? Many manufacturers are selling chillers that go down to (-80C). Thank you.-Paul
Dear Goldleaf, Not trying to quibble about words but you said it's important to completely dissolve the solvent". You must have meant to have the solvent "completely dissolve the solute".-Paul
hey you never really said what ph it should be and when to change it and how if needed.
Can you do this with live resin , also can you do so while preserving terpenes ?
Hey, would you give some technical info? Talking about Time. What is the average time that the Butane should be soaking the herb at low temperature with a Dewaxing spool with a close loop extractor, using Dry Ice? In the video you mention that even if a low temperature is used the winterization process should be performed after the extraction but that someone has done it successfully without the secondary winterization.
Another thing: the Time that the herb should be freezed in dry ice (in the spool) before be soaked with butane at low temperature, do yo have this time? All this due to the oil will be used in vapes.
Jesus tits bro we just wanna winterize some wax why does everyone have to get so friggin testical about everything simple video of hands on with diy would suffice
If final product is an ethanol extract it would seem like the best option is a water wash.
Yay did my first winterzation and checked it now after 48 hours and got a good centimeter of vax in the bottom so I guess i did something right. I used isopropanol 99.9% because it is easy to get here compared to pure alcohol may be more aggresive but I always use iso so what I get out before winterzation is vapeable so this can only get better from here.
If you do a bho extraction using a dewaxing collum and are after the distillate and terpenes do you have to carry out an ethanol based winterization after blasting and before using a short path distillation?
Wow! Goldleaf, I can’t believe you just said that. If you start with grain alcohal first you are technically using a weaker, longer pull on the frontiers of chlorophyll, but with a very cold (dry ice)ISO pull of 30 seconds in contact using wide mouth beakers and a timer( remembering that the 31 second of ISO leaving the herb is diverted to a second jar and to be considered the remaining 15 % of the pull. A second run which in effect is also a 30 second run to finish. The second run of course are scallop and half shell THC wax and fat of pearls and chlorophyll. Winterize, rack and purge, pull with alcohol, winterize, rack, reclaim, cure, absolute.
It seems like the dewaxing process followed by the ethanol evaporation would yield the oil with all of the terpenes remain? Whereas extracting oil through heat distillation you would lose the terpenes because it’s sensitive to heat?
Hah Yeahh ….. now i wish i had paid more attention on school in stead of smoking dabs in tha Fucking toilet during math ( Meth ??)class ???however : because of people like you we all can enjoy perfect extracts ! I dont have a Fucking clue youre talking about but Hell Yeah i will apply all your data ( when i am sober … ehhhhh i am never sober and always Fucking high Hahahaha so i have to ask my dab star friends too heheheh greets from the Dutch man
great stuff!!!!!!! feel free to subscribe
Each solvent strips something different, one can’t do what the other dose so if you use the wrong one first, you can’t go back and get what you left behind. ISO first, then ethanol. Absolutely.
What happens if I use Ethanol as a innitial solvent and then as a solvent for winterization?